- slide 1 of 6
Setting up your own wireless network for your home or business can be a bit of a challenge. If you do not have any experience with wireless networks then you may find it difficult. That is not to say that it can not be done. Anyone with a basic set of computer skills will be able to get this router set up and running. Then you can enjoy your high speed connection all over your house.
- slide 2 of 6
Connect Your Router
Before we can do anything else you have to connect the hardware. If you are replacing an existing router then you will simply hook it up the same way. If this is a new router then you should hook your Ethernet port into the modem and the WAN port on the router. Connect the computer to one of your numbered router ports. Consult your manual if you need further instructions on how to set up the wires.
- slide 3 of 6
Turn It All On and Off
Turn off your router and your modem. Then turn your modem back on. Then turn your router back on, wait for your lights to go back on.
- slide 4 of 6
Quality Time with Your Browser
Open your web browser
Open any web browser you may own and navigate to 192.168.2.1. Put this in your URL bar.
Submit and configuration
Click on the “submit" and you will access the configuration page. This is where you will define your settings. Here you should enter the name of your network and set your security settings.
*Note: If you are asked for a username and password put in admin for the username and leave the password blank.
Click on “initial setup" and then click on the button labeled “dynamic IP address". A new screen will appear click on “clone Mac address". Now tap enter. Your router should now have copied the address.
- slide 5 of 6
Your wireless network should now be set up.
Enjoy your new network. If you do not know what to choose for security one of these articles may help you out.
- slide 6 of 6
A Note on Bridge Mode
It is worth noting that if you have a highspeed connection you may need to set your router to Ethernet Bridged Mode before it will allow you to connect. If this is the case, you can download the PDF instructions for this from Belkin. This four page addendum to your user manual will give you step by step instruction.